AMPLIFY™ IO 3802

Category:	Ionomer , Functional Polymer
Manufacturer:	The Dow Chemical Company
Trademark:	AMPLIFY™ IO
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	x6OUly_AMPLIFY-IO-3802.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
AMPLIFY™IO 3802 ethylene acrylic acid ionic bond polymer is used for blow molding and co-extrusion processing of cast films, and is used in soft packaging applications. When co-extruding with nylon and other films, this product can provide excellent sealing performance. for food packaging and special packaging Excellent sealant in blow molding and cast film co-extrusion processing Comply with the following regulations: U.S. Food and Drug Administration Regulation 21 CFR 177.1310 (c) EU, No 10/2011 Please check the regulations for complete details.

General Information
Agency Ratings	FDA 21 CFR 177.1310 (c) Europe No 10/2011
Forms	Particle
Processing Method	Blow film Co-extrusion molding cast film

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.954	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.8	g/10 min	ASTM D1238
Ion Type	Sodium (Na)

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	51	µm
Tensile Strength ¹			ASTM D882
MD : Yield, 51 µm	23.1	MPa	ASTM D882
TD : Yield, 51 µm	19.5	MPa	ASTM D882
MD : Fracture, 51 µm	38.2	MPa	ASTM D882
TD : Fracture, 51 µm	39.4	MPa	ASTM D882
Tensile Elongation ²			ASTM D882
MD : Fracture, 51 µm	240	%	ASTM D882
TD : Fracture, 51 µm	330	%	ASTM D882

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	67.2	°C	ASTM D1525
Melting Temperature (DSC)	88.9	°C	Internal method

Extrusion instructions
吹塑薄膜的制造条件：用于处理此树脂的设备应由耐腐蚀材料制成。建议模具和适配器采用不锈钢和/或双面镀铬或镀镍。螺杆尺寸：A 和 B = 2.5 英寸 (64 mm)，C = 2 英寸 (51 mm)；30:1 L/D/尺寸螺杆类型：A = HS，B = DSBII，C = SFSM 模具间隙：70 密尔 (1.78 mm) 熔体温度：A 和 B = 420°F (216°C)，C = 470°F (243°C) 输出：模具周长的 10 磅/小时/英寸模具直径：8 英寸放大比：2.5:1 螺杆速度：45 rpm 冷冻线高度：30 分钟 (762 mm)

Extrusion instructions

吹塑薄膜的制造条件：用于处理此树脂的设备应由耐腐蚀材料制成。建议模具和适配器采用不锈钢和/或双面镀铬或镀镍。螺杆尺寸：A 和 B = 2.5 英寸 (64 mm)，C = 2 英寸 (51 mm)；30:1 L/D/尺寸螺杆类型：A = HS，B = DSBII，C = SFSM 模具间隙：70 密尔 (1.78 mm) 熔体温度：A 和 B = 420°F (216°C)，C = 470°F (243°C) 输出：模具周长的 10 磅/小时/英寸模具直径：8 英寸放大比：2.5:1 螺杆速度：45 rpm 冷冻线高度：30 分钟 (762 mm)

Note Message
1 .	Single-layer film data.
2 .	Single-layer film data.

Resin Grade	Manufacturer	Category	Trademark
TEKALOY™ T80GFR	Mando Advanced Materials Co., Ltd.	ABS+PBT	TEKALOY™
EBAC® SP1806	Westlake Chemical Corporation	EnBA	EBAC®
Latilub 66-20T G/20-V1	LATI S.p.A.	Nylon 66	Latilub
Iupiace® AH8P	Mitsubishi Engineering-Plastics Corp	PPE+PS	Iupiace®
LightSpan® LS-6943	NuSil Technology	Silicone	LightSpan®