Order Products : sales@su-jiao.com

Eltex® MED 200-MG02

Category:	PP Random Copolymer , Polypropylene Random Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex® MED
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	x59Gnn_Eltex-MED-200-MG02.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Polypropylene - Random Copolymer for Medical & Pharmaceutical applications Eltex® MED 200-MG02 is a random copolymer primarily intended for Blow-Fill-Seal and blow moulding but can also be used for injection or injection blow moulding. Eltex® MED 200-MG02 is produced according to Good Manufacturing Practices, and is available in granular form. Applications Bottles and containers for medical and pharmaceutical use Ampoules produced by the Blow-Fill-Seal process Medical devices Benefits and Features Good optical properties Steam sterilizable at 121°C Easy processing Compliance to Regulations on Medical use : Eltex® MED 200-MG02 complies with European Pharmacopeia Monographs 3.1.3 and 3.1.6 meets the requirements of the USP 29, <88> guideline concerning the biological reactivity test in vivo (so-called USP class VI)

Message

Polypropylene - Random Copolymer for Medical & Pharmaceutical applications

Eltex® MED 200-MG02 is a random copolymer primarily intended for Blow-Fill-Seal and blow moulding but can also be used for injection or injection blow moulding.
Eltex® MED 200-MG02 is produced according to Good Manufacturing Practices, and is available in granular form.

Applications

Bottles and containers for medical and pharmaceutical use

Ampoules produced by the Blow-Fill-Seal process

Medical devices

Benefits and Features

Good optical properties

Steam sterilizable at 121°C

Easy processing

Compliance to Regulations on Medical use :
Eltex® MED 200-MG02

complies with European Pharmacopeia Monographs 3.1.3 and 3.1.6

meets the requirements of the USP 29, <88> guideline concerning the biological reactivity test

in vivo (so-called USP class VI)

General Information
Features	Good Processability Opticals Random Copolymer Steam Sterilizable
Uses	Bottles Containers Medical/Healthcare Applications Pharmaceuticals
Agency Ratings	EP Monograph 3.1.3 EP Monograph 3.1.6 USP Class VI
RoHS Compliance	Contact Manufacturer
Forms	Granules
Processing Method	Blow Molding Injection Blow Molding Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	1.8	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	26.0	MPa	ISO 527-2
Flexural Modulus (23°C)	900	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	130	°C	ISO 306/A

Resin Grade	Manufacturer	Category	Trademark
RTP 800 TFE 15 SI 2	RTP Company	Acetal (POM) Copolymer	RTP
TECAFORM® TECAFORM®	Ensinger Inc.	Acetal (POM) Copolymer	TECAFORM®
TITANLENE® LDI 300YY	Lotte Chemical Titan (M) Sdn. Bhd.	LDPE	TITANLENE®
Nylene® 5243 HS	Custom Resins Group	Nylon 6	Nylene®
LNP™ STAT-KON™ EEF42 compound	SABIC Innovative Plastics	PEI	LNP™ STAT-KON™