Order Products : sales@su-jiao.com
Star L POM DW1
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Eurostar Engineering Plastics |
| Trademark: | Star L |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | x0zLyD_StarLPOMDW1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Star L POM DW1 is a Lubricated, POM Copolymer Injection Molding Resin. Low Wear and Low Noise when Sliding against Metals and Plastics (Experimental) |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.38 | g/cm³ | ISO 1183 |
| shrinkage- Flow (4.00 mm) | 2.8 - 3.4 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 55.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 20 | % | ISO 527-2 |
| Flexural Modulus | 1900 | MPa | ISO 178 |
| Flexural Stress | 60.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 6.5 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength (23°C) | 65 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed, 100 mm Span) | 152 | °C | ISO 75-2/Be |
| Melting Temperature (DSC) | 170 | °C | ISO 3146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 180 - 190 | °C | |
| Middle Temperature | 180 - 190 | °C | |
| Front Temperature | 180 - 200 | °C | |
| Processing (Melt) Temp | 180 - 200 | °C | |
| Mold Temperature | 60 - 100 | °C |
| Injection instructions |
|---|
| Screw Speed: Moderate |
| Note Message | |
|---|---|
| 1 . | 120x10x4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nanjing Hongrui PA66 A3010 | Nanjing Hongrui Engineering Plastics Co., Ltd. | Nylon 66 | Nanjing Hongrui PA66 |
| EMERGE™ PC 8980-6 | Trinseo | PC | EMERGE™ |
| EPIMIX POM GFR 10 NC | EPSAN Plastik SAN. ve TiC. A.S. | Acetal (POM) Copolymer | EPIMIX |
| LNP™ THERMOCOMP™ QF008 compound | SABIC Innovative Plastics | Nylon 610 | LNP™ THERMOCOMP™ |
| Peripor® 300 E | BASF Corporation | PS (EPS) | Peripor® |
