Order Products : sales@su-jiao.com
Geon™ Vinyl Dry Blend E7507
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Dry Blend |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | x0hWdb_Geon-Vinyl-Dry-Blend-E7507.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon E7507 is recommended for whites and colors above a 60L value only. Performs well in high rate fencing capstock applications. Not recommended for horizontal applications such as railing and decking except in white. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 13444 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 76 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2740 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 48.6 | MPa | ASTM D638 |
| Flexural Modulus | 3020 | MPa | ASTM D790 |
| Flexural Strength | 85.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Compression Molded) | 140 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 80.1 | J/cm | ASTM D4226 |
| 23°C 4 | > 178 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, annealed, 3.18mm 5 | 79.5 | °C | ASTM D648 |
| 0.45 MPa, annealed, 3.18mm 6 | 78.2 | °C | ASTM D648 |
| 1.8 MPa, annealed, 3.18mm, molded 7 | 77.5 | °C | ASTM D648 |
| 1.8 MPa, annealed, 3.18mm, molded 8 | 72.3 | °C | ASTM D648 |
| CLTE - Flow | 6.4E-5 | cm/cm/°C | ASTM D696 |
| Additional Information |
|---|
| Physical properties based on Geon E7507 beige 3048 lot# 4701698. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 193 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure A, C.125 Throwing |
| 4 . | Procedure B, C.125 Throwing |
| 5 . | Annealed at 60 deg.C |
| 6 . | conditioned @ 50 deg.C |
| 7 . | Annealed at 60 deg.C |
| 8 . | Conditioned at 50 deg.C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toughblend® PA66-1700 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | Nylon 6 | Toughblend® |
| Geon™ Vinyl Flexible R8180K | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Escorene™ Ultra LD 755 Series | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| LUVOCOM® 20-8112 | Lehmann & Voss & Co. | PPA | LUVOCOM® |
| Elastocon® 8055BX | Elastocon TPE Technologies | TPE | Elastocon® |
