Order Products : sales@su-jiao.com

Sinpolene MBW2492

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Teknor Apex Asia Pacific PTE. LTD.
Trademark:	Sinpolene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wy70Qw_Sinpolene-MBW2492.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Sinpolene MBW2492 is a polyethylene-based pure white masterbatch designed specifically for use in tubular film blowing, cast film, blow moulding and extrusion of polyolefins, where processing temperatures exceed 250?C. With its high pigment loading, Sinpolene MBW2492 offers high colouring value with excellent quality and performance. The blue undertone of this masterbatch is attributed by specially selected high performance, fine crystal size rutile titanium dioxide. Sinpolene MBW2492 is delivered as free flowing pellets for processing convenience. CHARACTERISTICS * Easy processing * Good dispersion * High opacifying power * Excellent whiteness

Message

Sinpolene MBW2492 is a polyethylene-based pure white masterbatch designed specifically for use in tubular film blowing, cast film, blow moulding and extrusion of polyolefins, where processing temperatures exceed 250?C. With its high pigment loading, Sinpolene MBW2492 offers high colouring value with excellent quality and performance.

The blue undertone of this masterbatch is attributed by specially selected high performance, fine crystal size rutile titanium dioxide.

Sinpolene MBW2492 is delivered as free flowing pellets for processing convenience.

CHARACTERISTICS
* Easy processing
* Good dispersion
* High opacifying power
* Excellent whiteness

General Information
Filler / Reinforcement	Titanium Dioxide Equivalent, 60% filler by weight
Uses	Films Sheet
RoHS Compliance	RoHS compliance
Appearance	White
Forms	Particle
Processing Method	Blow film Blow molding Sheet extrusion molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.15	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) ¹(190°C/2.16 kg)	< 15	g/10 min	ASTM D1238
Moisture Content		%	ASTM D3030

Additional Information
Recommended dosage: 3 - 8%

Note Message
1 .	Add SG= 2.15, moisture content<0.2%

Resin Grade	Manufacturer	Category	Trademark
POLYPRO® 5150H	YUHWA Korea Petrochemical Ind. Co., Ltd.	PP Homopolymer	POLYPRO®
PROTEQ™ SPM206	Marplex Australia Pty. Ltd.	PP Homopolymer	PROTEQ™
DENILUB M 00U 40TFSi	Vamp Tech	Acetal (POM) Copolymer	DENILUB
HiFill® PA4/6 GF33 HS NAT	Techmer Engineered Solutions	Nylon 46	HiFill®
Hostacom XBR 169 G G31463	LyondellBasell Industries	PP Copolymer	Hostacom