Delrin® 100PE BK602

Category: Acetal (POM) Homopolymer , ACETAL RESIN
Manufacturer: DuPont Performance Polymers
Trademark: Delrin®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: wwOW4z_Delrin-100PE-BK602.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
High Viscosity Acetal Homopolymer with Very Low Emissions
General Information
Additive
  • Mold Release
Uses
  • Profiles
  • Sheet
Forms
  • Pellets
Processing Method
  • Extrusion
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
Part Marking Code (ISO 11469)
  • >POM<
Resin ID (ISO 1043)
  • POM
PhysicalNominal ValueUnitTest Method
Density 1.42g/cm³ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)2.6g/10 minISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)2.20cm³/10minISO 1133
Molding Shrinkage ISO 294-4
    Across Flow 1.8%
    Flow 2.2%
HardnessNominal ValueUnitTest Method
Rockwell Hardness ISO 2039-2
    M-Scale 92
    R-Scale 120
MechanicalNominal ValueUnitTest Method
Tensile Modulus 3100MPaISO 527-2
Tensile Stress (Yield)72.0MPaISO 527-2
Tensile Strain (Yield)21%ISO 527-2
Nominal Tensile Strain at Break 32%ISO 527-2
Flexural Modulus 2900MPaISO 178
Flexural Stress (3.5% Strain)80.0MPaISO 178
ImpactNominal ValueUnitTest Method
Charpy Notched Impact Strength ISO 179/1eA
    -30°C 10kJ/m²
    23°C 11kJ/m²
Charpy Unnotched Impact Strength ISO 179/1eU
    -30°C 300kJ/m²
    23°C 350kJ/m²
ThermalNominal ValueUnitTest Method
Heat Deflection Temperature (1.8 MPa, Unannealed)97.0°CISO 75-2/A
Melting Temperature 1178°CISO 11357-3
CLTE ISO 11359-2
    Flow 1.1E-4cm/cm/°C
    Flow : -40 to 23°C 1.0E-4cm/cm/°C
    Transverse 1.1E-4cm/cm/°C
    Transverse : -40 to 23°C 1.0E-4cm/cm/°C
ElectricalNominal ValueUnitTest Method
Surface Resistivity 5.0E+13ohmsIEC 60093
Volume Resistivity > 1.0E+15ohms·cmIEC 60093
Electric Strength 44kV/mmIEC 60243-1
Relative Permittivity IEC 60250
    100 Hz 3.90
    1 MHz 3.90
Dissipation Factor IEC 60250
    100 Hz 5.0E-4
    1 MHz 5.5E-3
Comparative Tracking Index 600VIEC 60112
Fill AnalysisNominal ValueUnitTest Method
Melt Density 1.19g/cm³
Additional InformationNominal ValueUnitTest Method
Emission < 2.00mg/kgVDA 275
Note Message
1 .10°C/min
Resin Grade Manufacturer Category Trademark
CYCOLOY™ LG9000 resin SABIC Innovative Plastics PC+ABS CYCOLOY™
EL-Lene™ H5211PYL SCG Chemicals Co., Ltd. HDPE EL-Lene™
LNP™ LUBRICOMP™ DP003EH compound SABIC Innovative Plastics PC LNP™ LUBRICOMP™
Sylvin 6197-78 Green 3156 Sylvin Technologies Incorporated PVC, Unspecified Sylvin
Sumiliteresin® PR-1303 I SBHPP Phenolic Sumiliteresin®