Order Products : sales@su-jiao.com
TRIPET® LV2550GN45
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Samyang Corporation |
| Trademark: | TRIPET® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wvXfcZ_TRIPET-LV2550GN45.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRIPET® LV2550GN45 is a Polyethylene Terephthalate (PET) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.75 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (265°C/5.0 kg) | 50 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 to 0.40 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | < 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 117 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 147 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 12700 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 177 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 59 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 220 | °C | ASTM D648 |
| CLTE - Flow | 3.0E-5 | cm/cm/°C | ASTM D696 |
| RTI Elec (3.00 mm) | 150 | °C | UL 746 |
| RTI Imp (3.00 mm) | 150 | °C | UL 746 |
| RTI Str (3.00 mm) | 150 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Dielectric Constant | 3.80 | ASTM D150 | |
| Dissipation Factor | 0.017 | ASTM D150 | |
| Arc Resistance | 80.0 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | V-0 | ||
| 1.50 mm | 5VA |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3895 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| NILFLEX® SH A50 MC009 | Taro Plast S.p.A. | SEBS | NILFLEX® |
| Amodel® AT-6130 HS | Solvay Specialty Polymers | PPA | Amodel® |
| Plaslube® PA6/6 04003 MB | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| ULTEM™ 2110R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
