Order Products : sales@su-jiao.com
GLAMIDE® T-222SA
| Category: | Nylon 6 Elast , Polyamide 6 Elastomer |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | GLAMIDE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wsdLSN_GLAMIDE-T-222SA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GLAMIDE®T-222SA is a polyamide 6 elastomer (nylon 6 elastomer) product,. It is available in North America. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.03 | -- | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 6.0 | -- | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | ASTM D955 | |||
| 1.00 mm | 0.90 - 1.2 | -- | % | ASTM D955 |
| 3.00 mm | 1.8 - 2.3 | -- | % | ASTM D955 |
| Water Absorption | ASTM D570 | |||
| 24 hr | 0.60 | -- | % | ASTM D570 |
| Equilibrium, 65% RH | 2.0 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 85 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | ASTM D638 | |||
| Yield, -40°C | 50.0 | 45.0 | MPa | ASTM D638 |
| Yield, 23°C | 25.0 | 16.0 | MPa | ASTM D638 |
| Yield, 80°C | 8.00 | 6.00 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 200 | 200 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | |||
| -40°C | 1400 | 1200 | MPa | ASTM D790 |
| 23°C | 700 | 400 | MPa | ASTM D790 |
| 80°C | 200 | 100 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | |||
| Yield, -40°C | 50.0 | 45.0 | MPa | ASTM D790 |
| Yield, 23°C | 25.0 | 17.0 | MPa | ASTM D790 |
| Yield, 80°C | 8.00 | 6.00 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 8.00 | -- | mg | ASTM D1044 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | ASTM D256 | |||
| -40°C | 300 | 320 | J/m | ASTM D256 |
| 23°C | No Break | No Break | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 67.0 | -- | °C | ASTM D648 |
| CLTE - Flow | 9.0E-5 | -- | cm/cm/°C | ASTM D696 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 18 | 15 | kV/mm | ASTM D149 |
| Arc Resistance | 125 | 115 | sec | ASTM D495 |
| Comparative Tracking Index | 600 | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | HB | -- | UL 94 |
| Additional Information |
|---|
| 干燥 Comparative Tracking Index, IEC Method: >600 V |
| 调节后的 Tensile Elongation, ASTM D638, 23°C: >200 %Comparative Tracking Index, IEC Method: >600 V |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 260 - 300 | °C | |
| Mold Temperature | 50.0 - 70.0 | °C | |
| Injection Pressure | 50.0 - 80.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 1203-30 | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| SABIC® PPcompound 50MBTX | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| VENYL SEG138 - 7963 | AD majoris | Nylon 6 | VENYL |
| ExxonMobil™ PP7054L1 | ExxonMobil Chemical | PP Impact Copolymer | ExxonMobil™ |
| MAJORIS G551/20 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
