Order Products : sales@su-jiao.com

METLBOND® 1515-3

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Cytec Industries Inc.
Trademark:	METLBOND®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wsCO4T_METLBOND-1515-3.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Metlbond® 1515-3 and Metlbond 1515-3 MHT are 350°F (177°C) curing modified epoxy supported film adhesives. Metlbond 1515-3 can also be cured at 250°F (121°C). Its maximum continuous service temperature range is 275°F to 320°F (135°C to 160°C). Metlbond 1515-3 is available in medium- and high-tack (HT) versions which give the same mechanical and physical properties. Metlbond 1515-3 is commonly used for BMS 5-154 metal-to-metal and composite bonding and BMS 8- 341 cosmetic surfacing. Suggested Applications: Metal-to-metal bonding Composite bonding Cosmetic surfacing

Message

Metlbond® 1515-3 and Metlbond 1515-3 MHT are 350°F (177°C) curing modified epoxy supported film adhesives. Metlbond 1515-3 can also be cured at 250°F (121°C). Its maximum continuous service temperature range is 275°F to 320°F (135°C to 160°C).

Metlbond 1515-3 is available in medium- and high-tack (HT) versions which give the same mechanical and physical properties. Metlbond 1515-3 is commonly used for BMS 5-154 metal-to-metal and composite bonding and BMS 8- 341 cosmetic surfacing.

Suggested Applications:
Metal-to-metal bonding
Composite bonding
Cosmetic surfacing

General Information
Features	Good Surface Finish Heat Cure High Heat Resistance Humidity Resistant
Uses	Adhesives Aerospace Applications Bonding Metal Bonding
Appearance	Blue
Forms	Film

Thermal	Nominal Value	Unit
Glass Transition Temperature ¹	170	°C

Additional Information	Nominal Value	Unit
Volatiles	< 1.0	%

Cured Properties	Nominal Value	Unit
Lap Shear Strength ²
24°C	32.4	MPa
149°C	20.7	MPa

Note Message
1 .	Dry, G' knee by dynamic mechanical analysis
2 .	Metal-to-Metal, 1515-3 0.05 lb/ft² (242 g/m² ), BMS 8-245B, 2024 T3 aluminum, no primer Tested at 270°F (132°C)

Resin Grade	Manufacturer	Category	Trademark
ExxonMobil™ LLDPE LL 3402.48 Blown	ExxonMobil Chemical	LLDPE	ExxonMobil™ LLDPE
GLS ABS NN09	GLS Polymers Pvt. Ltd.	ABS	GLS ABS
Hanwha Total PE B230A	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	HDPE	Hanwha Total PE
Sylvin 5175-92 Green 3145	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
OTECH PVC OE9528 - Calendering	OTECH Corporation	PVC, Unspecified	OTECH PVC