Order Products : sales@su-jiao.com
Advanced Composites ADX-5028
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wosQlA_Advanced-Composites-ADX-5028.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Advanced Composites ADX-5028 is a polypropylene product, which contains talc filler. It is available in North America. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.02 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 57 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 18.9 | MPa | ISO 527-2 |
| Flexural Modulus | 1700 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 8.9 | kJ/m² | ISO 180 |
| 23°C | 52 | kJ/m² | ISO 180 |
| Instrumented Dart Impact 1(-30°C) | 34.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 109 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 53.0 | °C | ISO 75-2/A |
| Additional Information |
|---|
| Instrumented Dart Impact, ASTM D3763, -30°C, 6.7 m/s, (# Ductile: 30/30): >34 JScratch Resistance, FLTM BN108-13: >15 N |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Rear Temperature | 190 | °C | |
| Middle Temperature | 200 | °C | |
| Front Temperature | 210 | °C | |
| Processing (Melt) Temp | 200 - 235 | °C | |
| Mold Temperature | 40.0 - 60.0 | °C | |
| Injection Rate | Slow-Moderate | ||
| Cushion | 10.0 - 20.0 | mm |
| Injection instructions |
|---|
| Barrel Temperature, C4: 210C (410°F) |
| Note Message | |
|---|---|
| 1 . | 6.70 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® NY1599-BK11 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| Unichem 7233 | Colorite Polymers | PVC, Unspecified | Unichem |
| ADDINYL B2 ZV15 | ADDIPLAST | Nylon 6 | ADDINYL |
| Nylene® 8005 HSL | Custom Resins Group | Nylon 66 | Nylene® |
| Elastollan® R 1001 | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
