TECHNYL® A 222F NATURAL FA Datasheet,Nylon 66,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® A 222F Natural FA is an unfilled polyamide 66, heat stabilized, medium viscosity, for injection moulding, fast crystallization, for short cycles. This grade offers a good combination between primary properties of the unreinforced polyamide 66 and processing properties leading to increased productivity. These performances are associated with excellent dimensional stability and good rigidity of moulded parts. It is designed to be used in food contact applications.

General Information
Features	Heat Stabilized - Inorganic Fast molding cycle Good liquidity Compliance of Food Exposure
Uses	Valve/valve components Industrial application Consumer goods application field
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Appearance	Black Natural color
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA66

Physical	Nominal Value	Unit	Test Method
Density	1.14	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	1.2	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (23°C)	4000	MPa	ISO 527-2/1A
Tensile Stress			ISO 527-2/1A
Yield, 23°C	95.0	MPa	ISO 527-2/1A
Fracture, 23°C	95.0	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	9.0	%	ISO 527-2

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	4.1	kJ/m²	ISO 179/1eA

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	261	°C	ISO 11357-3

Injection	Nominal Value	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	265 - 275	°C
Middle Temperature	270 - 280	°C
Front Temperature	280 - 285	°C
Mold Temperature	60 - 80	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Resin Grade	Manufacturer	Category	Trademark
Nanjing Hongrui PA66 A305	Nanjing Hongrui Engineering Plastics Co., Ltd.	Nylon 66	Nanjing Hongrui PA66
AKROMID® B3 GF 30 S1 black 950089 (2091)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®
DuraSurf™ BSR	Crown Plastics	UHMWPE	DuraSurf™
LACTEL® 75:25 DL-PLG	DURECT Corporation	PLA	LACTEL®
LEXAN™ EXL1182T resin	SABIC Innovative Plastics	PC	LEXAN™

Category:	Nylon 66 , Polyamide 66
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wm9uxX_TECHNYLA222FNATURALFA.pdf
PRICE:	Order Products email sales@su-jiao.com