Order Products : sales@su-jiao.com
Jam PE 486H2
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wlQffH_Jam-PE-486H2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 486H2 is a High Density Polyethylene product. It can be processed by blown film and is available in Africa & Middle East. Typical application: Film. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.948 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.25 | g/10 min | ASTM D1238 |
| Flow Rate Ratio | > 25.0 | ASTM D1238 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Titanium | 3 | ppm |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 15 | µm | |
| Secant Modulus | ASTM D882 | ||
| 2% Secant, MD : 15 µm, Blown Film | 700 | MPa | |
| 2% Secant, TD : 15 µm, Blown Film | 650 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 15 µm, Blown Film | 32.0 | MPa | |
| TD : Break, 15 µm, Blown Film | 17.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 15 µm, Blown Film | 500 | % | |
| TD : Break, 15 µm, Blown Film | > 700 | % | |
| Dart Drop Impact (15 µm, Blown Film) | 140 | g | ASTM D1709A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 401 | RTP Company | PS (GPPS) | RTP |
| AKROMID® S3 GF 15 1 natural (3223) | AKRO-PLASTIC GmbH | Nylon 610 | AKROMID® |
| Eltex® A4009PFN1324 | INEOS Olefins & Polymers Europe | HDPE | Eltex® |
| Grivory® GVS-5H nat | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| Plaskon SMT-B-1FX | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
