Order Products : sales@su-jiao.com
Hanwha Total PP HJ400
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wlC4uo_Hanwha-Total-PP-HJ400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HJ400 is a homo polypropylene resin for injection molding applications. This grade is designed to be processed in conventional injection molding equipment. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 35.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 500 | % | ASTM D638 |
| Flexural Modulus | 1570 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 0°C | 20 | J/m | ASTM D256 |
| 23°C | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 110 | °C | ASTM D648 |
| Vicat Softening Temperature | 155 | °C | ASTM D1525 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 - 200 | °C | |
| Middle Temperature | 180 - 210 | °C | |
| Front Temperature | 210 - 250 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Pressure | 78.5 - 118 | MPa | |
| Holding Pressure | 58.8 - 98.1 | MPa |
| Injection instructions |
|---|
| Cooling Time: 25 to 40 sec |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEDUR® L FC 9510-5 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| Adell PC DR-18 | Adell Plastics, Inc. | PC | Adell PC |
| Grilamid® TRVX-50X9 nat | EMS-GRIVORY | Nylon 12 | Grilamid® |
| HAIPLEN H120 C6 | Taro Plast S.p.A. | PP Homopolymer | HAIPLEN |
| IDI BMC B20 (Glass Content 15%) | IDI Composites International | TS, Unspecified | IDI BMC |
