Order Products : sales@su-jiao.com
RELENE® 24FA040
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wl6Emw_RELENE24FA040.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Relene 24FA040 is a Low Density Polyethylene (LDPE) grade produced by high pressure tubular process. It does not contain Slip and Antiblock and can be extruded on any conventional LDPE extruder with ease. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Broken, 40 µm, blown film | 18.0 | MPa | ASTM D882 |
| TD : Broken, 40 µm, blown film | 16.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Broken, 40 µm, blown film | 250 | % | ASTM D882 |
| TD : Broken, 40 µm, blown film | 400 | % | ASTM D882 |
| Dart Drop Impact (40 µm, Blown Film) | 80 | g | ASTM D1709A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mytex® AS33L-16 | Mytex Polymers | PP, Unspecified | Mytex® |
| Cri-Line HFLT-615 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| HiFill® PA6 0500 | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| PENTAMID AB L5 H1 RC schwarz | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
| Eleme NGL300IG | Eleme Petrochemical Company Ltd | LLDPE | Eleme |
