Order Products : sales@su-jiao.com
Xuchuan 2005L/B-8005
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Xuchuan Chemical (Suzhou) Co., Ltd |
| Trademark: | Xuchuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wadLwB_Xuchuan-2005L-B-8005.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Xuchuan 2005L/B-8005 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It is available in Asia Pacific. Typical application: Consumer Goods. Primary characteristic: high flow. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.450 to 0.600 | g/cm³ | |
| Density | |||
| A-2005L : 40°C | 1.010 to 1.020 | g/cm³ | |
| B-8005 : 40°C | 1.080 to 1.200 | g/cm³ | |
| Viscosity | |||
| A-2005L : 40°C | 700 to 1100 | mPa·s | |
| B-8005 : 40°C | 300 to 500 | mPa·s |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Cream Time | 7.0 to 9.0 | sec | |
| End of Rise Time | 50.0 to 60.0 | sec |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Free Rise Foam Density | 230 to 260 | kg/m³ | |
| Preheat Temperature | |||
| Part A | 50 to 60 | °C | |
| Part B | 50 to 60 | °C | |
| Preheat Time | |||
| Part A | 8.0 to 10.0 | hr | |
| Part B | 8.0 to 12.0 | hr | |
| Processing Temperature | |||
| Part A | 40 to 45 | °C | |
| Part B | 38 to 42 | °C |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore C) | 47 to 72 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (Break) | 4.00 to 6.00 | MPa | |
| Tensile Elongation (Break) | 400 to 600 | % | |
| Tear Strength | 18.0 to 26.0 | kN/m |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 79 to 81 | ||
| Demold Time | 5.0 to 7.0 | min |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 45.0 to 55.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 9744-80FUV Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ASTAPET™ PC/PET MDA267 | Marplex Australia Pty. Ltd. | PET | ASTAPET™ |
| KumhoSunny PC/ABS HAC8200FR | Shanghai KumhoSunny Plastics Co., Ltd. | PC+ABS | KumhoSunny PC/ABS |
| Plenco 04414 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| POTICON AT303 | Otsuka Chemical Co., Ltd. | Acetal (POM) Copolymer | POTICON |
