Order Products : sales@su-jiao.com

DuPont™ 20 Series DPE-2010

Category:	LDPE , Low Density Polyethylene
Manufacturer:	DuPont Packaging & Industrial Polymers
Trademark:	DuPont™ 20 Series
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wY3mDt_DuPont-20-Series-DPE-2010.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
DuPont™ 20 Series DPE-2010, specialty low density polyethylene resin is characterized by low melt index and intermediate crystallinity. This product, produced via a unique polymerization process, has outstanding flexibility and environmental stress crack resistance. Features: Contains Oleamide as a slip agent. Characteristics/Benefits: DPE-2010 specialty polyethylene resins conform to the requirements of ASTM D1248-69, Type I, Class A, Category 3. Applications: Injection blow molded bottles and tubes, and extruded tubing in particular used in medical, pharmaceutical, and personal care packaging

Message

DuPont™ 20 Series DPE-2010, specialty low density polyethylene resin is characterized by low melt index and intermediate crystallinity. This product, produced via a unique polymerization process, has outstanding flexibility and environmental stress crack resistance.

Features: Contains Oleamide as a slip agent.

Characteristics/Benefits: DPE-2010 specialty polyethylene resins conform to the requirements of ASTM D1248-69, Type I, Class A, Category 3.

Applications: Injection blow molded bottles and tubes, and extruded tubing in particular used in medical, pharmaceutical, and personal care packaging

General Information
Additive	Oleamide Slip
Features	Good Flexibility High ESCR (Stress Crack Resist.) Low Flow
Uses	Bottles Cosmetic Packaging Medical Packaging Pharmaceutical Packaging Tubing
Agency Ratings	ASTM D 1248, I, Class A, Cat. 3 DMF 1528 FDA 21 CFR 177.1520(c) 2.2
Forms	Pellets
Processing Method	Extrusion Injection Blow Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.920	g/cm³	ASTM D792, ISO 1183
Melt Mass-Flow Rate (MFR)
--	1.9	g/10 min	ASTM D1238
190°C/2.16 kg	1.9	g/10 min	ISO 1133

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	96.0	°C	ASTM D1525, ISO 306
Peak Melting Temperature	109	°C	ASTM D3418, ISO 3146
Freezing Point
--	96	°C	ISO 3146
--	96	°C	ASTM D3418

Injection	Nominal Value	Unit
Processing (Melt) Temp	180 to 235	°C

Resin Grade	Manufacturer	Category	Trademark
Starflam PX06009	Eurostar Engineering Plastics	Nylon 6	Starflam
Nypol® PA A3 G30 HS UV RH PRT0327 NR407	Petropol Industry and Trade of Polymers LTDA	Nylon 66	Nypol® PA
Grivory® HT XE 4027 nat	EMS-GRIVORY	Nylon 10T/X	Grivory®
LNP™ THERMOCOMP™ GF006XXZ compound	SABIC Innovative Plastics	PSU	LNP™ THERMOCOMP™
Polybutene-1 PB 4235-1 Ivory	LyondellBasell Industries	PB	Polybutene-1