Order Products : sales@su-jiao.com

Veradel® 3600P

Category:	PESU , Polyethersulfone
Manufacturer:	Solvay Specialty Polymers
Trademark:	Veradel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wXHtO5_Veradel-3600P.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Veradel® PESU was formerly marketed as Gafone™ PESU

Veradel® 3000P, 3100P, 3200P, 3400P and 3600P are polyethersulfone (PESU) powders for dissolving or dispersing into solutions. They can also be ground to smaller particle size or blended with other solid particles. The grades differ by their molecular weights, with 3000P the highest and 3600P the lowest. There is a direct correlation between molecular weight and solution viscosity.

PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water, and mineral acids. Cast films or coatings of PESU are transparent and have additional desirable properties including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance.

Typical applications include high-temperature coating formulations, membranes, advanced high-temperature composites, and specialty adhesives.

General Information
Features	Acid Resistant Flame Retardant Food Contact Acceptable Good Adhesion Good Chemical Resistance Good Creep Resistance Good Dimensional Stability Good Thermal Stability Good Toughness High Flow High Heat Resistance High Tensile Strength Hydrolysis Resistant Low Molecular Weight Medium Rigidity
Uses	Adhesives Binder Coating Applications Compounding
Agency Ratings	NSF 51 2
RoHS Compliance	RoHS Compliant
Appearance	Transparent - Slight Yellow
Forms	Granules Powder
Processing Method	Coating Solution Processing Spraying

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.37	g/cm³	ASTM D792
Water Absorption (24 hr)	0.60	%	ASTM D570
Solution Viscosity ¹	275	mPa·s	Internal Method
Residual Solvent	0.50	%	Internal Method

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	220	°C	ASTM E1356
CLTE - Flow	4.9E-5	cm/cm/°C	ASTM D696

Note Message
1 .	25% in dimethylacetamide at 40°C

Resin Grade	Manufacturer	Category	Trademark
RTP 703 Z	RTP Company	HDPE	RTP
TAROBLEND 66	Taro Plast S.p.A.	PC+ABS	TAROBLEND
WPP PP WPP2194-Natural	Washington Penn Plastic Co. Inc.	PP Copolymer	WPP PP
ACCUCOMP™ HP0306L	ACLO Compounders Inc.	PP Homopolymer	ACCUCOMP™
GAPEX® RPP25EA32BL	Ferro Corporation	PP Homopolymer	GAPEX®