Order Products : sales@su-jiao.com
Xuchuan A-9088A/B-6088A
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Xuchuan Chemical (Suzhou) Co., Ltd |
| Trademark: | Xuchuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wUxIVY_Xuchuan-A-9088A-B-6088A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Xuchuan A-9088A/B-6088A is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It is available in Asia Pacific. Typical application: Consumer Goods. Primary characteristic: high hardness. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.300 to 0.450 | g/cm³ | |
| Density | |||
| A-9088A : 40°C | 1.010 to 1.020 | g/cm³ | |
| B-6088A : 40°C | 1.080 to 1.200 | g/cm³ | |
| Viscosity | |||
| A-9088A : 40°C | 1.00 to 1.40 | Pa·s | |
| B-6088A : 40°C | 0.600 to 0.800 | Pa·s |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Williams Abrasion | 300 to 400 | cc/php |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Cream Time | 6.0 to 8.0 | sec | |
| End of Rise Time | 50.0 to 60.0 | sec |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Free Rise Foam Density | 170 to 200 | kg/m³ | |
| Preheat Temperature | |||
| Part A | 50 to 60 | °C | |
| Part B | 50 to 60 | °C | |
| Preheat Time | |||
| Part A | 6.0 to 8.0 | hr | |
| Part B | 6.0 to 8.0 | hr | |
| Processing Temperature | |||
| Part A | 40 to 45 | °C | |
| Part B | 38 to 42 | °C |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 to 95 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (Break) | 10.0 to 15.0 | MPa | |
| Tensile Elongation (Break) | 100 to 200 | % | |
| Tear Strength | 35.0 to 40.0 | kN/m |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 110 | ||
| Demold Time | 5.0 to 7.0 | min |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 45.0 to 55.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUMILITE® EL-3800F | Sumitomo Bakelite Co., Ltd. | Epoxy | SUMILITE® |
| Texalan® 5 Series 598A | Austin Novel Materials Co. Ltd. | TPU-Polyester | Texalan® 5 Series |
| NYLEM® 66 GFR 25 | EMAS Plastik San.Tic.AS. | Nylon 66 | NYLEM® |
| POLYFLON™ F-104U | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
| Fortron® 1132L4 | Celanese Corporation | PPS | Fortron® |
