Order Products : sales@su-jiao.com
ICORENE® 1050
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wUMfGs_ICORENE-1050.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 1050 is a high density polyethylene specifically developed for rotational moulding. ICORENE® 1050 is a very fast processing material suitable for use in many different applications. It has a good balance of properties such as toughness and stiffness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.947 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.8 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 610 | % | ASTM D638 |
| Flexural Modulus | 965 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 170 | J/cm | Internal Method |
| Note Message | |
|---|---|
| 1 . | based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nycal™ 1850R33H | Technical Polymers, LLC | Nylon 6 | Nycal™ |
| ALCOM® PA6 900/1 GF8 GB7 | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
| Diamond ASA T-120 | Network Polymers, Inc. | ASA | Diamond ASA |
| Ecotan B F50 FL NERO | Soredi S.p.a. | Nylon 6 | Ecotan B |
| OP - PC - Filled/Lubricated 15 PTFE-30GF | Oxford Polymers | PC | OP - PC - Filled/Lubricated |
