Order Products : sales@su-jiao.com
CROSSVINIL K/100 PLA3
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | CROSSVINIL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wTQh8z_CROSSVINIL-K-100-PLA3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CROSSVINIL K/100 PLA3 is a special compound having flame retardant characteristics. CROSSVINIL K/100 PLA3 has low halogen emissions. Suitable for extrusion of electrical cables sheathing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.54 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 92 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 15.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 270 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | 6.0 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (100°C, 168 hr) | -12 | % | IEC 60811 |
| Change in Tensile Stress (in Hydrocarbons) | -20 | % | ENI 018 100 |
| Change in Tensile Strain at Break (in Hydrocarbons) | -15 | % | ENI 018 100 |
| Heat Aging - 1 hr (150°C) | Pass | IEC 60811 |
| Thermal | Nominal Value | Test Method | |
|---|---|---|---|
| Hot Pressure Test - Residual 1(90°C) | > 70.0 | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | < 10 | % | IEC 60754-1 |
| Oxygen Index | 32 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 165 | °C | |
| Cylinder Zone 4 Temp. | 170 | °C | |
| Cylinder Zone 5 Temp. | 170 | °C | |
| Die Temperature | 175 | °C |
| Note Message | |
|---|---|
| 1 . | 4 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES J-1200/10/FD | Techmer Engineered Solutions | ABS | TES |
| UBESTA 3024 LU | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| VECTOR® 4113N | TSRC Corporation | SIS+SI | VECTOR® |
| Forprene® 6NE901A55 | SO.F.TER. SPA | TPV | Forprene® |
| Latistat 67-08 | LATI S.p.A. | Nylon 66 | Latistat |
