Order Products : sales@su-jiao.com
OP - PC/PEI 10GF
| Category: | PEI+PC , Polyether Imide + PC |
| Manufacturer: | Oxford Polymers |
| Trademark: | OP - PC/PEI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wT1Yxe_OP---PC-PEI-10GF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OP - PC/PEI 10GF is a Polyether Imide + PC (PEI+PC) material filled with 10% glass fiber. It is available in North America for injection molding. Primary attribute of OP - PC/PEI 10GF: Flame Rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.40 to 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 103 | MPa | |
| Break | 103 | MPa | |
| Flexural Modulus | 3790 | MPa | ASTM D790 |
| Flexural Strength | 145 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 59 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 191 | °C | |
| 1.8 MPa, Unannealed | 182 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | V-0 | ||
| 3.18 mm | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 to 121 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Drying Time, Maximum | 8.0 | hr | |
| Rear Temperature | 316 to 338 | °C | |
| Middle Temperature | 321 to 343 | °C | |
| Front Temperature | 327 to 349 | °C | |
| Processing (Melt) Temp | 316 to 343 | °C | |
| Mold Temperature | 93.3 to 149 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® F02-081A-6C | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Tecomid® NB30 GR13 BK EF | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| Tecnoprene® T60K4 NERO900 | SO.F.TER. SPA | PP Homopolymer | Tecnoprene® |
| Lucent PA 6-01 | Lucent Polymers, Inc. | Nylon 6 | Lucent PA |
| Kepital® MX20BT01 | KEP Americas | Acetal (POM) Copolymer | Kepital® |
