Order Products : sales@su-jiao.com
GLAMIDE® T-402FR
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | GLAMIDE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wSLgBT_GLAMIDE-T-402FR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GLAMIDE® T-402FR is a Polyamide 6 (Nylon 6) product filled with 30% glass fiber. It is available in North America. Characteristics include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.59 | -- | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 20 | -- | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | ASTM D955 | |||
| 1.00 mm | 0.40 to 0.80 | -- | % | |
| 3.00 mm | 1.0 to 1.3 | -- | % | |
| Water Absorption | ASTM D570 | |||
| 24 hr | 1.1 | -- | % | |
| Equilibrium, 65% RH | 1.9 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | ASTM D638 | |||
| Yield, -40°C | 215 | -- | MPa | |
| Yield, 23°C | 150 | 85.0 | MPa | |
| Yield, 80°C | 92.0 | -- | MPa | |
| Tensile Elongation (Break, 23°C) | 3.5 | 4.6 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | |||
| -40°C | 12500 | -- | MPa | |
| 23°C | 9800 | 5800 | MPa | |
| 80°C | 5400 | -- | MPa | |
| Flexural Strength | ASTM D790 | |||
| Yield, -40°C | 235 | -- | MPa | |
| Yield, 23°C | 200 | 95.0 | MPa | |
| Yield, 80°C | 125 | -- | MPa | |
| Compressive Strength (23°C) | 140 | -- | MPa | ASTM D695 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 25.0 | -- | mg | ASTM D1044 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | ASTM D256 | |||
| -40°C | 70 | 80 | J/m | |
| 23°C | 110 | 130 | J/m |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 217 | -- | °C | |
| 1.8 MPa, Unannealed | 210 | -- | °C | |
| CLTE - Flow | 2.3E-5 | -- | cm/cm/°C | ASTM D696 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 21 | 15 | kV/mm | ASTM D149 |
| Arc Resistance | 25.0 | 15.0 | sec | ASTM D495 |
| Comparative Tracking Index | 325 | 325 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | -- | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 250 to 280 | °C | |
| Mold Temperature | 60.0 | °C | |
| Injection Pressure | 40.0 to 60.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 399 X 125073 A | RTP Company | PC | RTP |
| SEQUEL® E3400 | LyondellBasell Industries | TPO (POE) | SEQUEL® |
| New-prene™ 8080N | Total Polymer Vision (Suzhou) Co., LTD | PP+EPDM | New-prene™ |
| Diaterm® B26 GF15 | DTR S.r.l. (Develop Thermoplastic Resins) | Nylon 66 | Diaterm® |
| Infino AE-2030 | SAMSUNG SDI CO., LTD. | PC+PET | Infino |
