Order Products : sales@su-jiao.com

MarFlex® 1018

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	MarFlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wQhvIR_MarFlex-1018.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

MarFlex® 1018 is a Low Density Polyethylene material. It is available in Latin America or North America for extrusion coating.

Important attributes of MarFlex® 1018 are:

Good Processability

Heat Resistant

Typical applications include:

Coating Applications

Food Contact Applications

Packaging

Sealing Applications

General Information
Features	Good Processability High Heat Resistance Low Neck-In
Uses	Coating Applications Food Packaging Laminates Paper Coatings Sealants
Agency Ratings	FDA 21 CFR 177.1520 FED L-P-390C, Type I, Class H, Category 5, Grades (1-5)
Processing Method	Extrusion Coating

Physical	Nominal Value	Unit	Test Method
Density	0.917	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.0	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Oxygen Transmission Rate ¹(25 µm, Extrusion Coating)	8000	cm³/m²/24 hr	ASTM D3985
Water Vapor Transmission Rate ²(25 µm, Extrusion Coating)	21	g/m²/24 hr	ASTM F1249

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	90.0	°C	ASTM D1525
Peak Melting Temperature	104	°C	ASTM D3418

Note Message
1 .	Testing performed on coated slip sheet 14.4 lbs/ream
2 .	Testing performed on coated slip sheet 14.4 lbs/ream

Resin Grade	Manufacturer	Category	Trademark
Shin-Etsu Elastomer X-30-1028U	Shin-Etsu Silicones of America	Silicone Rubber, HTV	Shin-Etsu Elastomer
NEOFLON™ NP-101	DAIKIN AMERICA, INC.	FEP	NEOFLON™
BIOLLOY KG320	Techno Polymer Co, Ltd.	PLA+ABS	BIOLLOY
ISPLEN® PM 366 AV	REPSOL	PP Copolymer	ISPLEN®
LNP™ THERMOCOMP™ KZ001L compound	SABIC Innovative Plastics	Acetal (POM) Copolymer	LNP™ THERMOCOMP™