Order Products : sales@su-jiao.com

Santoprene™ 251-80W232

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	ExxonMobil Chemical
Trademark:	Santoprene™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wPXsYS_Santoprene-251-80W232.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

It is a soft, colorable, flame-retardant thermoplastic vulcanized elastomer (TPV) in the thermoplastic elastomer (TPE) series. This material has good fluid resistance, contains non-ether brominated flame retardants, and does not contain metal deactivator. This brand of Shanduping TPV is a shear rate dependent product that can be processed on conventional thermoplastic injection molding, extrusion molding, blow molding, thermoforming or vacuum forming equipment. This is a polyolefin-based material that can be recycled in the production process.

General Information
Features	Good dimensional stability Low compressive deformability Flexibility at low temperatures Recyclable materials Good electrical performance Good heat aging resistance Good coloring Ozone resistance Good chemical resistance Fatigue resistance Flame retardancy
Uses	Cable sheath Wire and cable applications Application in Automobile Field cord sheath
Agency Ratings	UL QMFZ2 UL QMFZ8 UL QMTT2
RoHS Compliance	RoHS compliance
UL File Number	E86313 E80017
Appearance	Natural color
Forms	Particle
Processing Method	Blow molding Multiple injection molding Co-extrusion molding Extrusion Extrusion blow molding Sheet extrusion molding Thermoforming Profile extrusion molding Vacuum forming Injection blowing molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.24	g/cm³	ASTM D792, ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shaw A, 15 seconds, 23°C, 2.00mm)	86		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Across Flow (100% Strain, 23°C)	3.90	MPa	ASTM D412, ISO 37
Tensile Strength - Across Flow (Break, 23°C)	9.00	MPa	ASTM D412, ISO 37
Tensile Elongation - Across Flow (Break, 23°C)	550	%	ASTM D412, ISO 37
Compression Set
23°C, 168 hr ¹	31	%	ASTM D395B
70°C, 22 hr ²	40	%	ASTM D395B
100°C, 168 hr ³	55	%	ASTM D395B
23°C, 168 hr ⁴	31	%	ISO 815
70°C, 22 hr ⁵	40	%	ISO 815
100°C, 168 hr ⁶	55	%	ISO 815

Thermal	Nominal Value	Unit	Test Method
RTI Elec	90.0	°C	UL 746
RTI			UL 746
1.50 mm	85.0	°C	UL 746
3.00 mm	90.0	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength (23°C, 2.00 mm)	28	kV/mm	ASTM D149
Comparative Tracking Index (CTI)	PLC 0		UL 746
High Amp Arc Ignition (HAI)	PLC 0		UL 746
High Voltage Arc Resistance to Ignition (HVAR)	PLC 6		UL 746
High Voltage Arc Tracking Rate (HVTR)	PLC 2		UL 746
Hot-wire Ignition (HWI)	PLC 3		UL 746

Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
1.50 mm	V-0		UL 94
3.00 mm	V-0		UL 94
Oxygen Index	27	%	ASTM D2863, ISO 4589-2

Additional Information
如果适用，这是基于扇形浇口注塑成型的平板测试结果。拉伸强度、伸长率和拉伸应力沿垂直流动方向测定 - ISO 1 型，ASTM die C。25% 形变时的永久压缩变形。从埃克森美孚欧洲分支机构直接购买的所有产品都符合 REACH 法规。对于埃克森美孚未进口至欧洲的产品，用户应自行评估其是否满足 REACH 法规。

Legal statement
未经埃克森美孚化工书面允许，这种产品包括其产品名称，不得在任何医疗应用领域予以使用或有关详细的产品监管信息，请联系客户服务。

Injection	Nominal Value	Unit
Drying Temperature	82.2	°C
Drying Time	3.0	hr
Suggested Max Moisture	0.080	%
Suggested Max Regrind	20	%
Mold Temperature	10.0 - 51.7	°C
Injection Rate	Fast
Back Pressure	0.345 - 0.689	MPa
Screw Speed	100 - 200	rpm
Clamp Tonnage	4.1 - 6.9	kN/cm²
Cushion	3.18 - 6.35	mm
Screw L/D Ratio	16.0:1.0 to 20.0:1.0
Screw Compression Ratio	2.0:1.0 to 2.5:1.0
Vent Depth	0.025	mm

Injection instructions
Santoprene TPV与乙缩醛和PVC不相容。更多关于加工和模具设计的信息，请查阅我们的《注射成型指南》。

Extrusion	Nominal Value	Unit
Drying Temperature	82.2	°C
Drying Time	3.0	hr

Extrusion instructions
Santoprene TPV与乙缩醛和PVC不相容。更多关于加工和模具设计的信息，请查阅我们的《挤出成型指南》。

Note Message
1 .	Type 1
2 .	Type 1
3 .	Type 1
4 .	Type a
5 .	Type a
6 .	Type a

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom SCR1F-4080	Spartech Polycom	ABS	Spartech
VESTAMID® HTplus M1900	Evonik Industries AG	PPA	VESTAMID® HTplus
VINIKA® CA95PA	Mitsubishi Chemical Performance Polymers, Inc.	PVC, Flexible	VINIKA®
LNP™ THERMOCOMP™ MC002 compound	SABIC Innovative Plastics	PP, Unspecified	LNP™ THERMOCOMP™
3M™ Dyneon™ PTFE Compound TF 6712	3M Advanced Materials Division	PTFE	3M™ Dyneon™ PTFE Compound