Order Products : sales@su-jiao.com

Exelene® PP C0600

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Montachem International, Inc.
Trademark:	Exelene® PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wKBmuu_Exelene-PP-C0600.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Applications:

Compression molded soda bottle caps

Characteristics:

The Exelene resin PP C0600 meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

General Information
Additive	Antioxidant Antistatic Slip
Features	Antioxidant Antistatic Impact Copolymer Slip
Uses	Caps Food Service Applications Non-specific Food Applications
Agency Ratings	FDA 21 CFR 177.1520(c)
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.898	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	6.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale, 23°C)	93		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	30.3	MPa	ASTM D638
Tensile Elongation ²(Yield)	6.3	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm)	1650	MPa	ASTM D790B

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm)	160	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load ⁴(0.45 MPa, Unannealed)	108	°C	ASTM D648

Note Message
1 .	Type IV, 50 mm/min
2 .	Type IV, 50 mm/min
3 .	Method I (3 point load), 13 mm/min
4 .	2°C/min

Resin Grade	Manufacturer	Category	Trademark
VESTAMID® L L-GF15	Evonik Industries AG	Nylon 12	VESTAMID® L
AMTOPP CI20	Inteplast Group	PP, Unspecified	AMTOPP
AVALON® 95 ABR	Huntsman Corporation	TPU-Polyester	AVALON®
Petra® 130 FR	BASF Corporation	PET	Petra®
Pier One POM AH900-NAT	Pier One Polymers, Inc.	Acetal (POM) Homopolymer	Pier One POM