Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroplastic FEP 6322HTZ
| Category: | FEP , Perfluoroethylene Propylene Copolymer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroplastic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wE8vWL_3M-Dyneon-Fluoroplastic-FEP-6322HTZ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Features Dyneon™ FEP 6322 HT Z Fluorothermoplastic was designed primarily for high-speed extrusion for wire insulation. Its distinguishing features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.15 | g/cm³ | ISO 12086 |
| Melt Mass-Flow Rate (MFR) (372°C/5.0 kg) | 22 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 23°C) | 20.0 | MPa | ISO 527-1 |
| Tensile Strain (Break, 23°C) | 300 | % | ISO 527-1 |
| Flexural Modulus (23°C) | 580 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 260 | °C | ISO 12086 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant | ASTM D150 | ||
| 23°C, 1 MHz | < 2.15 | ||
| 23°C, 9.40 GHz | 2.06 | ||
| Dissipation Factor | ASTM D150 | ||
| 1 MHz | < 9.0E-4 | ||
| 9.40 GHz | 4.0E-4 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 | |
| Oxygen Index | > 95 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1302 | RTP Company | PPS | RTP |
| Braskem PP H 301 | Braskem | PP Homopolymer | Braskem PP |
| apigo® CA 200 | API SpA | TPO (POE) | apigo® |
| Aropol™ L 2450 | Ashland Performance Materials | Polyester, TS | Aropol™ |
| Laprene® 83E29ZA45 | SO.F.TER. SPA | SEBS | Laprene® |
