Order Products : sales@su-jiao.com
Kingfa GFPP-20
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Kingfa |
| Trademark: | Kingfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wDdDAN_Kingfa-GFPP-20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Kingfa GFPP-20 is a polypropylene material, which contains a 20% glass fiber reinforced material. This product is available in North America or Asia Pacific,. The main features of Kingfa GFPP-20 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.40 - 1.1 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 102 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(23°C, Injection Molded) | 70.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C, Injection Molded) | 4.5 | % | ASTM D638 |
| Flexural Modulus 3(23°C, Injection Molded) | 4000 | MPa | ASTM D790 |
| Flexural Strength 4(23°C, Injection Molded) | 85.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 90 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 6.40mm, injection molding | 155 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 6.40mm, injection molding | 145 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | HB | UL 94 | |
| 3.00 mm | HB | UL 94 |
| Additional Information |
|---|
| Filler Content, ISO3451/1, Method A: 20% |
| Note Message | |
|---|---|
| 1 . | 10 mm/min |
| 2 . | 10 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sorona® 3301 NC010 | DuPont Performance Polymers | PTT | Sorona® |
| Vyncolit® E7459 | Vyncolit N.V. | Epoxy | Vyncolit® |
| NEFTEKHIM PP 2648J | Nizhnekamskneftekhim Inc. | PP Homopolymer | NEFTEKHIM PP |
| ADDILENE J 370 | ADDIPLAST | PP Copolymer | ADDILENE |
| ARMAMID® PA HC 10 | Poly Plastic | Nylon 6 | ARMAMID® |
