Order Products : sales@su-jiao.com
CERTENE™ PRM-12C
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wD4Wk5_CERTENE-PRM-12C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRM-12C is a certified prime grade Clarified Injection Molding copolymer specially designed for thin-walled applications requiring excellent clarity and good impact resistance. PRM-12C exhibits medium-high flow rate, very good processability, rapid mold filling, fast cycle time, very good dimensional stability, low warpage, and good balance of mechanical properties. PRM-12C typical applications include high quality housewares where high clarity is a most, thin-wall high gloss rigid packaging, and high quality consumer articles. PRM-12C complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1 + 3.2, and most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 89 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 28.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 87.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 GF 65/1M | Plastcom | Nylon 6 | SLOVAMID® 6 |
| TUFNYL® RGF 15 BLACK | SRF Ltd. | Nylon 66 | TUFNYL® |
| Daicel PP PP-AF30-K2 | Daicel Polymer Ltd. | PP, Unspecified | Daicel PP |
| ESTACARB 0501 | Cossa Polimeri S.r.l. | PC | ESTACARB |
| InSphere® 0513FR-P | Synthos S.A. | PS (EPS) | InSphere® |
