Order Products : sales@su-jiao.com
Mecoline S TP 1021 F
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wCtxDl_Mecoline-S-TP-1021-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Halogen-free, low smoke, thermoplastic, highly flame retardant compound for the sheathing of low and medium voltage cables in General Installations applications. This compound features a high line speed and good processability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.48 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (150°C/21.6 kg) | 9.0 | g/10 min | ISO 1133 |
| Water Absorption - after 24h at 90°C | 1.11 | mg/cm² | IEC 811-1-3 |
| pH | > 4.5 | IEC 60754-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test - penetration 6h at 80°C | 13 | % | DIN VDE 0472 |
| Temperature Index | 290 | °C | ASTM D2863 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Conductivity | < 10.0 | µS/mm |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | 0 | % | IEC 754-1 |
| Toxicity | 0.800 | EN 50305 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 7.10 | MPa | BS 6469 99.1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 140 to 160 | °C | |
| Extruder Screw L/D Ratio | 20.0:1.0 to 25.0:1.0 | ||
| Extruder Screw Compression Ratio | 1.0:1.2 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 48 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 10.8 | MPa | IEC 811-1-1 |
| Tensile Strain | |||
| Break | 230 | % | IEC 811-1-1 |
| Break, -30°C | 27 | % | IEC 811-1-4 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | IEC 811-1-2 | ||
| 100°C, 168 hr | 3.3 | % | |
| 110°C, 168 hr | 8.9 | % | |
| Change in Tensile Strain at Break in Air | IEC 811-1-2 | ||
| 100°C, 168 hr | -13 | % | |
| 110°C, 168 hr | -29 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -25.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity 1(23°C) | 1.2E+13 | ohms·cm | IEC 60167 |
| Electric Strength 2(23°C) | 21 | kV/mm |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 42 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 90.0 to 110 | °C | |
| Cylinder Zone 2 Temp. | 105 to 125 | °C | |
| Cylinder Zone 3 Temp. | 120 to 140 | °C | |
| Cylinder Zone 4 Temp. | 120 to 140 | °C | |
| Cylinder Zone 5 Temp. | 130 to 150 | °C | |
| Adapter Temperature | 135 to 155 | °C | |
| Die Temperature | 150 to 170 | °C |
| Note Message | |
|---|---|
| 1 . | 500V |
| 2 . | 50 Hz |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® Vestolen A BI5828 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® Vestolen A |
| Bergamid™ X BG6600-8047 RS BK001 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Larpeek 50 | LATI S.p.A. | PEEK | Larpeek |
| Perfactory® WIC100G | EnvisionTEC, Inc. | Acrylic, Unspecified | Perfactory® |
| Sylvin 9302-70 FUV WHITE 1337 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
