Order Products : sales@su-jiao.com
Maxxam™ X MX5200-8028 RS BK001
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Maxxam™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wBVRzk_Maxxam-X-MX5200-8028-RS-BK001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glass fiber reinforced Polypropylene compound with good stiffness, UV resistance and high impact strength |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.995 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield, 23°C, 4.00 mm, Injection Molded) | 45.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C, 4.00 mm, Injection Molded) | 12 | % | ISO 527-2/50 |
| Flexural Modulus 2(23°C, 4.00 mm, Injection Molded) | 2800 | MPa | ISO 178 |
| Flexural Stress 3(23°C, 4.00 mm, Injection Molded) | 65.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 21 | kJ/m² | ISO 180/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 85.0 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Processing (Melt) Temp | 200 - 240 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 2.0 mm/min |
| 3 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toyolac® 100G-30 | Toray Resin Company | ABS | Toyolac® |
| ULTEM™ 2212EPR resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| NEXUS BIO BIO-201 | Nexus Resin Group, LLC. | Biodeg Polymers | NEXUS BIO |
| APEX® 2590-H | Teknor Apex Company | PVC, Flexible | APEX® |
| TORZEN® HV360AHSL NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
