Order Products : sales@su-jiao.com
Ultramid® T KR 4365 G5
| Category: | Nylon 6/6T , Polyamide 6/6T Copolymer |
| Manufacturer: | BASF Corporation |
| Trademark: | Ultramid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | w8HGsc_Ultramid-T-KR-4365-G5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ultramid T KR 4365 G5 is a 25% glass fiber reinforced, flame-retardant, injection molding PA6/6T grade. Good mechanical properties, high tracking resistance, low tendency for deposits on electrical contacts, very resistant to electrolytic corrosion, resistant to solder baths; electroplateable. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.38 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 5.5 | -- | % | |
| Equilibrium, 23°C, 50% RH | 1.3 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 8300 | 8000 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | |||
| Break, -40°C | 192 | 177 | MPa | |
| Break, 23°C | 150 | 140 | MPa | |
| Break, 80°C | 96.0 | -- | MPa | |
| Tensile Strain (Break, 23°C) | 3.0 | 3.0 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | |||
| -30°C | 7.0 | -- | kJ/m² | |
| 23°C | 13 | -- | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179 | |||
| -30°C | 80 | -- | kJ/m² | |
| 23°C | 75 | -- | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 280 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 270 | -- | °C | ISO 75-2/A |
| Melting Temperature (DSC) | 295 | -- | °C | ISO 3146 |
| CLTE | ||||
| Flow | 2.5E-5 | -- | cm/cm/°C | |
| Transverse | 5.5E-5 | -- | cm/cm/°C | |
| RTI Elec | UL 746 | |||
| 0.750 mm | 140 | -- | °C | |
| 1.50 mm | 140 | -- | °C | |
| 3.00 mm | 140 | -- | °C | |
| RTI Imp | UL 746 | |||
| 0.750 mm | 100 | -- | °C | |
| 1.50 mm | 105 | -- | °C | |
| 3.00 mm | 110 | -- | °C | |
| RTI Str | UL 746 | |||
| 0.750 mm | 120 | -- | °C | |
| 1.50 mm | 130 | -- | °C | |
| 3.00 mm | 140 | -- | °C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | -- | ohms·cm | IEC 60093 |
| Dielectric Constant (1 MHz) | 4.00 | -- | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.020 | -- | IEC 60250 | |
| Comparative Tracking Index | 600 | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 0.370 mm | V-2 | -- | ||
| 0.750 mm | V-0 | -- | ||
| 3.00 mm | V-0 | -- | ||
| 1.50 mm | 5VA | -- |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8215-75 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TYNEP® E4450 | Tyne Plastics LLC. | PET | TYNEP® |
| NAXALOY® 793MF6 | MRC Polymers, Inc. | PC+Polyester | NAXALOY® |
| EnCom HH ABS 290 | EnCom, Inc. | ABS | EnCom |
| Hiprolon® 90 VN | Arkema | Nylon 612 | Hiprolon® |
