Order Products : sales@su-jiao.com
Mapex NT0620GB
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Ginar Technology Co., LTD. |
| Trademark: | Mapex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | w54yFS_Mapex-NT0620GB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Mapex NT0620GB PA6 is an impact modified 30 % glass reinforced product for injection moulding in black colour |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.34 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage - Flow (1.60 mm) | 0.10 - 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 131 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.5 | % | ISO 527-2 |
| Flexural Modulus | 7240 | MPa | ISO 178 |
| Flexural Stress | 200 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 210 | °C | ASTM D648, ISO 75-2/A |
| Melting Temperature | 220 | °C | DSC |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.20 mm) | HB | UL 94 |
| Additional Information |
|---|
| Notched Izod Impact Strength, ISO 180/1, 23°C, notch 0.25in: 160 J/mNotched Izod Impact Strength, ISO 180/1, -30°C, notch 0.25in: 85 J/m |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 240 - 270 | °C | |
| Middle Temperature | 240 - 270 | °C | |
| Front Temperature | 240 - 270 | °C | |
| Nozzle Temperature | 240 - 250 | °C | |
| Mold Temperature | 30.0 - 100 | °C | |
| Injection Pressure | 50.0 - 120 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 30.0 - 80.0 | MPa | |
| Back Pressure | 0.00 - 0.300 | MPa | |
| Screw Speed | 60 - 100 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melos™ FM 1639 | Melos GmbH | TPO (POE) | Melos™ |
| SCANBLEND P AP2060 F20 | Polykemi AB | PBT+ASA | SCANBLEND P |
| Ultramid® 8202 L | BASF Corporation | Nylon 6 | Ultramid® |
| ETILINAS LL0207MA | POLYETHYLENE MALAYSIA SDN BHD | LLDPE | ETILINAS |
| MACOMASS PP MM-PP HK 82 | MACOMASS Verkaufs AG | PP Homopolymer | MACOMASS PP |
