Order Products : sales@su-jiao.com
SABIC® LLDPE R40039EE
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | w51c3q_SABIC-LLDPE-R40039EE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LLDPE R40039EE is a medium density polyethylene (MDPE) copolymer. It is typically used for its good stress crack resistance, rigidity, gloss and low warpage. The resin contains UV-stabilizer. It is recommended that SABIC® LLDPE R40039E is grinded before use in rotational moulding applications. Typical applications. Because of the good processing performance and physical properties, SABIC® LLDPE R40039EE is typically used for the rotational moulding of large industrial and agricultural tanks, trash containers and chemical shipping drums. Due to the good mechanical properties and low warpage this product is typically used for injection moulding of screw closures, caps and housewares. The UV-stabilization provides good protection for the final product. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal CO-630, Compression Molded, F50) | > 150 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 69 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant (Compression Molded) | 600 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 18.0 | MPa | |
| Break, Compression Molded | 19.0 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 500 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 710 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 117 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 to 240 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SuperLite® SL550600-100 (3.0mm) | Azdel, Inc. | PP, Unspecified | SuperLite® |
| Andur 920-AP | Anderson Development Company | PUR-Est/eth,TDI | Andur |
| Kumho EP HSP 8390 | Korea Kumho Petrochemical Co., Ltd. | PPE+PS | Kumho EP |
| Jam HDPE HM CRP 100 Blue | Jam Petrochemical Company | HDPE | Jam HDPE |
| KOPPS® S13A65BL | Kolon Plastics, Inc. | PPS | KOPPS® |
