Order Products : sales@su-jiao.com
Elastocon® 2840
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | w1xyM3_Elastocon2840.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® 2840 is a translucent thermoplastic elastomer compound formulated for applications that require rubber-like properties and high resilience. Elastocon® 2840 is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2840 is supplied as ready to use pellets in 50 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.30 | MPa | ASTM D412 |
| Tensile Strength | 7.60 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 360 | % | ASTM D412 |
| Tear Strength | 17.9 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 | °C | |
| Middle Temperature | 188 - 199 | °C | |
| Front Temperature | 193 - 204 | °C | |
| Nozzle Temperature | 199 - 204 | °C | |
| Processing (Melt) Temp | 199 - 204 | °C | |
| Mold Temperature | 38 - 49 | °C | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.345 - 1.03 | MPa |
| Injection instructions |
|---|
| Elastocon® 2840 thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 - 160 | °C | |
| Cylinder Zone 2 Temp. | 160 - 171 | °C | |
| Cylinder Zone 3 Temp. | 171 - 177 | °C | |
| Cylinder Zone 4 Temp. | 182 - 188 | °C | |
| Cylinder Zone 5 Temp. | 177 - 182 | °C | |
| Die Temperature | 160 - 171 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 75 to 125 RPM |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 128 HI UV | RTP Company | PP Copolymer | RTP |
| GETILAN GPE/400 | Crosspolimeri S.p.A. | XLPE | GETILAN |
| ICORENE® 2550 YELLOW 2538 | ICO Polymers EMEA, A Division of A. Schulman | LLDPE | ICORENE® |
| Rotuba CAP CP801 (16% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
| Sylvin 8773-60D White 1430 | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
