Order Products : sales@su-jiao.com
HIVAL® FL23 020 AC MM
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Nexeo Solutions, LLC. |
| Trademark: | HIVAL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | w0kUAG_HIVAL-FL23-020-AC-MM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Suggested Applications Good Impact Strength on both flat and creased film, textile packaging, light produce, bread bags and other thin packaging films. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.8 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD | 179 | MPa | |
| 1% Secant, TD | 207 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 10.3 | MPa | |
| TD : Yield | 11.0 | MPa | |
| MD : Break | 27.6 | MPa | |
| TD : Break | 23.4 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 300 | % | |
| TD : Break | 500 | % | |
| Dart Drop Impact | 90 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 360 | g | |
| TD | 200 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 70 | ASTM D2457 | |
| Haze | 50 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Royalcast® 3101 | Chemtura | PUR-Ether | Royalcast® |
| Yuyao PP TL203 | Yuyao Tenglong Plastics Co., Ltd. | PP, Unspecified | Yuyao PP |
| AMPLIFY™ IO 3801B | The Dow Chemical Company | Ionomer | AMPLIFY™ IO |
| Flontech® FT-905-ST | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Grivory® GV XE 16102 (GVL-6H HP) | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
