Order Products : sales@su-jiao.com
Andur 8000 AP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vzh7d0_Andur-8000-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 8000 AP is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 80 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by curing Andur 8000-AP with polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 21°C | 127000 | cP | ASTM D2393 |
| 70°C | 3400 | cP | ASTM D2393 |
| 100°C | 425 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 3.3 to 3.7%Specific Gravity, ASTM D792, 70°F: 1.04 g/mlSpecific Gravity, ASTM D792, 212°F: 1.03 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYFORT® FPP 40 GFC HI | A. Schulman Europe | PP Homopolymer | POLYFORT® |
| MonoSol® M1000 | MonoSol, LLC | PVOH | MonoSol® |
| DJSilicone NE--E-2/NE-E-2U | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| KRYSTALFLEX™ PE393 | Huntsman Corporation | PUR-Eth,aliphat | KRYSTALFLEX™ |
| POCAN® BF 4409 000000 | LANXESS Corporation | PBT | POCAN® |
