Order Products : sales@su-jiao.com
PULSE™ A35-110
| Category: | PC+ABS , PC/ABS Engineering Resin |
| Manufacturer: | Trinseo |
| Trademark: | PULSE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vxTYwu_PULSE-A35-110.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PULSE* A 35-110 engineering resins give exceptional impact strength even at low temperatures and have high heat distortion temperature. The proprietary mass ABS technology allows these physical properties to be achieved together with superior flow performance for easy moulding of complex parts and design freedom. PULSE A 35-110 is used in a wide range of applications where a balance of low temperature toughness, high heat distortion and processability are required. The high distortion temperature of this grade makes PULSE A 35-110 particularly suitable for automotive applications including lighting, air-inlet, dashboard devices, and many interior and exterior parts. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | |||
| -- | 1.16 | g/cm³ | ISO 1183/B |
| -- | 1160 | kg/m³ | ISO 1183 1 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 14 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow | 0.30 to 0.70 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.20 to 0.60 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 105 | MPa | DIN 53459 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2350 | MPa | ISO 527-2/1, ISO 527-2 3 2 |
| Tensile Stress | |||
| Yield | 58.0 | MPa | ISO 527-2/5 |
| Yield | 57.0 | MPa | ISO 527-2 3 |
| Break | 53.0 | MPa | ISO 527-2/5 |
| Tensile Strain | |||
| Yield | 5.0 | % | ISO 527-2/5 |
| Yield | 4.8 | % | ISO 527-2 4 |
| Break | > 80 | % | ISO 527-2/5 |
| Nominal strain at break | > 50 | % | ISO 527-2 5 |
| Flexural Modulus | 2200 | MPa | ISO 178 |
| Flexural Stress 6 | 85.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -40°C | 15 | kJ/m² | ISO 179 |
| 0°C | 26 | kJ/m² | ISO 179 |
| 23°C | 35 | kJ/m² | ISO 179 |
| -30°C | 15.0 | kJ/m² | ISO 179/1eA 7 |
| 23°C | 35.0 | kJ/m² | ISO 179/1eA 8 |
| Charpy Unnotched Impact Strength | |||
| -40°C | No Break | ISO 179 | |
| 23°C | No Break | ISO 179, ISO 179/1eU 9 | |
| -30°C | No Break | ISO 179/1eU 10 | |
| Notched Izod Impact Strength | ISO 180 | ||
| -40°C | 50 | kJ/m² | |
| 23°C | 70 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 130 | °C | ISO 75-2/B |
| 0.45 MPa | 130 | °C | ISO 75-2 11 |
| 1.8 MPa, Unannealed | 110 | °C | ISO 75-2/A |
| 1.8 MPa | 110 | °C | ISO 75-2 12 |
| Vicat Softening Temperature | |||
| -- | 145 | °C | ISO 306/A120 |
| -- | 132 | °C | ISO 306/B50 |
| 50°C/h, B (50N) | 132 | °C | ISO 306 13 |
| CLTE - Flow (0 to 80°C) | 7.5E-5 to 8.0E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.20 | W/m/K | ASTM C177 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating 14(1.60 mm) | HB | Internal Method | |
| Burning Behav. at 1.6mm nom. thickn. (1.60 mm, UL) | HB | ISO 1210 15 | |
| Oxygen Index 16 | 21 | % | ASTM D2863, ISO 4589-2 3 17 |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | 1.0 mm/min |
| 7 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 10 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 11 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 12 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 13 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 14 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| 15 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 16 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| 17 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 2914-80 White 125 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Ablebond 77-2LTC | Henkel Ablestik | Epoxy | Ablebond |
| DAI-EL™ G-7261 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| KumhoSunny ABS 720R | Shanghai KumhoSunny Plastics Co., Ltd. | ABS | KumhoSunny ABS |
| O'Tech OW 824 | O'Tech Corporation | PVC, Unspecified | O'Tech |
