Order Products : sales@su-jiao.com
Clariant PC PC-000-L
| Category: | PC , Polycarbonate |
| Manufacturer: | Clariant Corporation |
| Trademark: | Clariant PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vuuapT_Clariant-PC-PC-000-L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Clariant PC PC-000-L is a Polycarbonate (PC) material. It is available in North America for injection molding. Important attributes of Clariant PC PC-000-L are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 60.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 100 | % | ASTM D638 |
| Flexural Modulus | 2070 | MPa | ASTM D790 |
| Flexural Strength | 89.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 690 | J/m | ASTM D256 |
| Tensile Impact Strength | No Break | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 132 | °C | |
| 1.8 MPa, Unannealed | 127 | °C | |
| Melting Temperature | 252 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 266 to 277 | °C | |
| Middle Temperature | 271 to 282 | °C | |
| Front Temperature | 282 to 299 | °C | |
| Nozzle Temperature | 277 to 304 | °C | |
| Processing (Melt) Temp | 282 to 293 | °C | |
| Mold Temperature | 71.1 to 93.3 | °C | |
| Injection Pressure | 82.7 to 124 | MPa | |
| Back Pressure | 0.345 to 1.03 | MPa | |
| Screw Speed | 40 to 70 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 400 SI 2 | RTP Company | PS (GPPS) | RTP |
| TEKASTER™ F100 | Mando Advanced Materials Co., Ltd. | PBT | TEKASTER™ |
| TEKAMID™ TB110M40 | Mando Advanced Materials Co., Ltd. | Nylon 6 | TEKAMID™ |
| Adiprene® LFH 120 | Chemtura | PUR-Ether | Adiprene® |
| 3M™ Dyneon™ PTFE TF 2053Z | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE |
