Tecnoflon® FOR 5361

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vtlysQ_Tecnoflon-FOR-5361.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 5361 is a low viscosity cure incorporated fluoroelastomer terpolymer designed to provide improved low temperature characteristics. Tecnoflon® FOR 5361 exhibits the same excellent heat and chemical resistance expected from Tecnoflon® copolymers. Some of the basic properties of Tecnoflon® FOR 5361 are: Improved low temperature performance Good chemical resistance Good heat resistance Very low compression set Excellent mould release Lack of mould fouling Superior mould flow Tecnoflon® FOR 5361 can be used for injection, compression and transfer molding of O-rings, diaphragms, gaskets, seals, moulded shapes or other items requiring improved low temperature performance. Tecnoflon® FOR 5361 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 5361 is a low viscosity cure incorporated fluoroelastomer terpolymer designed to provide improved low temperature characteristics. Tecnoflon® FOR 5361 exhibits the same excellent heat and chemical resistance expected from Tecnoflon® copolymers.

Some of the basic properties of Tecnoflon® FOR 5361 are:

Improved low temperature performance

Good chemical resistance

Good heat resistance

Very low compression set

Excellent mould release

Lack of mould fouling

Superior mould flow

Tecnoflon® FOR 5361 can be used for injection, compression and transfer molding of O-rings, diaphragms, gaskets, seals, moulded shapes or other items requiring improved low temperature performance.
Tecnoflon® FOR 5361 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Good Chemical Resistance Good Flow Good Mold Release High Heat Resistance Low Compression Set Low Viscosity Terpolymer
Uses	Belts/Belt Repair Blending Diaphragms Gaskets Hose Low Temperature Applications Profiles Seals Sheet
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	21	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Sevrene® 4582-90A	Vi-Chem Corporation	TPE	Sevrene®
U-polymer AXG-1500-30	UNITIKA Plastics Division	Polyarylate	U-polymer
Andur 9-APF-LM/Curene3005/St95	Anderson Development Company	PUR-Ester/TDI	Andur
EVALENE® LLDPE LF20181	JG Summit Petrochemical Corporation	LLDPE	EVALENE® LLDPE
LG PMMA IH830H	LG MMA Corp.	Acrylic (PMMA)	LG PMMA