Order Products : sales@su-jiao.com

Osterlene® GPPS0900

Category:	PS (GPPS) , General Purpose Polystyrene
Manufacturer:	Osterman & Company
Trademark:	Osterlene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vtdNDr_OsterleneGPPS0900.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

GPPS0900 is a crystal polystyrene for both injection molding and cap layer co-extrusion.

Injection molding applications such as medical and laboratory parts, tumblers and jewel boxes demonstrate the polymer's ability to be molded with minimal stresses and fast cycles.

Utilizing GPPS0900 as a cap layer in cups, plates and other consumer disposables takes advantage of this polymer's melt rheology.

General Information
Uses	Cup Shield Medical/nursing supplies
Agency Ratings	FDA 21 CFR 177.1640
Processing Method	Co-extrusion molding Injection molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	9.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3030	MPa	ASTM D638
Tensile Strength	46.2	MPa	ASTM D638
Flexural Modulus	3100	MPa	ASTM D790
Flexural Strength	93.1	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Annealed)	96.7	°C	ASTM D648
Vicat Softening Temperature	101	°C	ASTM D1525

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Resin Grade	Manufacturer	Category	Trademark
Ultramid® A3EG7 FC Aqua	BASF Corporation	Nylon 66	Ultramid®
Bergamid™ A700 G25 H (f1)	PolyOne Corporation	Nylon 66	Bergamid™
Durethan® BKV 30 H3.0 000000	LANXESS GmbH	Nylon 6	Durethan®
Latene® EP 7 TES/30	LATI S.p.A.	PP Copolymer	Latene® EP
LOFEX® A311S	Lotte Chemical Corporation	PET	LOFEX®