Order Products : sales@su-jiao.com
ADMER™ AT1955E
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vtOHQl_ADMER-AT1955E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® AT1955E is an maleic anhydride grafted, elastomer-based adhesive designed for cast, sheet and blown film, blow molding, double- and triple-bubble-process. This grade shows high bonding not only to PET, but also to EVOH, PA, PE, PP and PC. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.6 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 30 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 9.00 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 62.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BMFO | Arkema | Nylon 11 | Rilsan® |
| RTP 1200 S-55D TFE 15 | RTP Company | TPU-Polyester | RTP |
| ADDILENE H 526 N30 | ADDIPLAST | PP Homopolymer | ADDILENE |
| ALTECH® PBT + ASA A 4212/507 MR/GF12 | ALBIS PLASTIC GmbH | PBT+ASA | ALTECH® PBT + ASA |
| Kingfa PA6-M25G20 | Kingfa | Nylon 6 | Kingfa |
