TECHNYL® A 206 NATURAL Z Datasheet,Nylon 66,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® A 206 NATURAL Z is an unreinforced polyamide PA66, medium viscosity, for injection moulding. This grade offers two main advantages: its good resilience and its excellent filling quality of moulds.

General Information
Features	Good liquidity Good demoulding performance Excellent appearance
Uses	Industrial application Furniture Application in Automobile Field Consumer goods application field
Agency Ratings	EC 1907/2006 (REACH) UL QMFZ2
RoHS Compliance	RoHS compliance
Appearance	Natural color
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA66

Physical	Dry	Conditioned	Unit	Test Method
Density	1.14	--	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	1.2	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	3100	1700	MPa	ISO 527-2/1A
Tensile Stress				ISO 527-2/1A
Yield, 23°C	86.0	60.0	MPa	ISO 527-2/1A
Fracture, 23°C	56.0	50.0	MPa	ISO 527-2/1A
Tensile Strain (Yield, 23°C)	5.0	18	%	ISO 527-2
Flexural Modulus (23°C)	2900	1400	MPa	ISO 178
Flexural Stress (23°C)	120	60.0	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	4.5	14	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	No Break	--		ISO 179/1eU
Notched Izod Impact (23°C)	5.0	15	kJ/m²	ISO 180

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	90.0	--	°C	ISO 75-2/Af
Melting Temperature	263	--	°C	ISO 11357-3

Electrical	Dry	Conditioned	Unit	Test Method
Comparative Tracking Index (Solution A)	600	600	V	IEC 60112

Flammability	Dry	Conditioned	Test Method
Flame Rating			UL 94
1.6 mm	V-2	--	UL 94
3.2 mm	V-2	--	UL 94

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	265 - 275	°C
Middle Temperature	270 - 280	°C
Front Temperature	280 - 285	°C
Mold Temperature	60 - 80	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 66 , Polyamide 66
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vs8G1e_TECHNYLA206NATURALZ.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Versaflex™ OM 1060X-9	PolyOne Corporation	TPE	Versaflex™
XYLEX™ X8409AC resin	SABIC Innovative Plastics	PC+Polyester	XYLEX™
ASPUN™ 6840A	The Dow Chemical Company	LLDPE	ASPUN™
Epoxies, Ect. 20-2101 (Enterable Gel)	Epoxies, Etc.	PUR, Unspecified	Epoxies, Ect.
Petrothene® GA501021	LyondellBasell Industries	LLDPE	Petrothene®