Order Products : sales@su-jiao.com
ResMart Repro HIPS Black
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | ResMart |
| Trademark: | ResMart Repro |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vqxrfC_ResMart-Repro-HIPS-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| General Purpose Reprocessed Impact Polystyrene Black |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 4.0 - 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 98 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 30.3 | MPa | ASTM D638 |
| Flexural Modulus | 2070 | MPa | ASTM D790 |
| Flexural Strength | 42.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 48 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 77.8 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 73.9 | °C | |
| Drying Time - Desiccant Dryer | 4.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Processing (Melt) Temp | 191 - 246 | °C | |
| Mold Temperature | 51.7 - 68.3 | °C | |
| Injection Pressure | 68.9 - 96.5 | MPa |
| Injection instructions |
|---|
| Dew Point: 0°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TYLON® 2433 | Tyne Plastics LLC. | Nylon 6 | TYLON® |
| Vyncolit® 73-70-70 C-P | Vyncolit N.V. | DAP | Vyncolit® |
| Delrin® 100TL NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| Dynacom LN-I | Dynachem Co. Ltd. | PP Copolymer | Dynacom |
| IDI SMC S20 (Glass Content 20%) | IDI Composites International | TS, Unspecified | IDI SMC |
