Order Products : sales@su-jiao.com
Razamid® B111U
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Razin™ Engineering Plastics |
| Trademark: | Razamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vqTvMt_Razamid-B111U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Razamid B111U is an Injection grade high impact natural color polyamide 6 resin. It combines good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.80 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 50.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 40 | % | ASTM D638 |
| Flexural Modulus | 1800 | MPa | ASTM D790 |
| Flexural Strength | 65.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 70 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 190 | °C | ASTM D648 |
| Vicat Softening Temperature | 200 | °C | ASTM D1525 |
| Peak Melting Temperature | 250 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+12 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+13 | ohms·cm | IEC 60093 |
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 110 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 260 to 280 | °C | |
| Middle Temperature | 265 to 300 | °C | |
| Front Temperature | 275 to 305 | °C | |
| Processing (Melt) Temp | 275 to 310 | °C | |
| Mold Temperature | 50.0 to 80.0 | °C | |
| Injection Pressure | 55.0 to 140 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEETEC LDPE XL700 | Lotte Chemical Corporation | LDPE | SEETEC LDPE |
| BJB Polyurethane WC-788 A/B | BJB Enterprises, Inc. | PUR, Unspecified | BJB Polyurethane |
| Cri-Line LC-512-55-BR | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| Hostaform® S 9243 XAP² ™ | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| POLYfill PPH BF405510 VT1 | Polykemi AB | PP Homopolymer | POLYfill |
