Order Products : sales@su-jiao.com
Lupol® ED1045D
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | Lupol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vp9EeI_Lupol-ED1045D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description Thermoplastic Elastomer, Soft Touch Application Electrical & Electronic, Automotive Parts |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.958 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 6.0 to 9.0 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm) | 12.7 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.20 mm) | > 200 | % | ASTM D638 |
| Flexural Modulus 3(6.40 mm) | 245 | MPa | ASTM D790 |
| Flexural Strength 4(Yield, 6.40 mm) | 5.88 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.40 mm) | No Break | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 to 80.0 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Suggested Max Moisture | < 0.010 | % | |
| Rear Temperature | 190 to 210 | °C | |
| Middle Temperature | 200 to 230 | °C | |
| Front Temperature | 200 to 230 | °C | |
| Nozzle Temperature | 210 to 230 | °C | |
| Processing (Melt) Temp | 200 to 230 | °C | |
| Mold Temperature | 40.0 to 60.0 | °C | |
| Back Pressure | 29.4 to 58.8 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 10 mm/min |
| 4 . | 10 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bayflex® 180 RRIM (20% Mica) | Covestro - PUR | PUR-Ether/MDI | Bayflex® |
| ALTECH® PP-H A 1000/249 FR | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| Braskem PE PB-681 | Braskem | LDPE | Braskem PE |
| EMOPLEN® A 830 G3 | EMAS Plastik San.Tic.AS. | PP, Unspecified | EMOPLEN® |
| LEXAN™ EXL1434 resin | SABIC Innovative Plastics | PC | LEXAN™ |
