Order Products : sales@su-jiao.com
RheTech Polypropylene GC30P250-01UVEG
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | RheTech, Inc. |
| Trademark: | RheTech Polypropylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | voeXPL_RheTech-Polypropylene-GC30P250-01UVEG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% Glass Fiber Reinforced, Chemically Coupled, UV Stabilized, Polypropylene Copolymer, Black, Extrusion Grade |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.2 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 62.1 | MPa | ASTM D638 |
| Flexural Modulus | 5170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 150 | J/m | ASTM D256 |
| Dart Drop Impact | 1.69 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 156 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 135 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 - 82.2 | °C | |
| Drying Time | 1.0 - 2.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 188 - 216 | °C | |
| Middle Temperature | 193 - 221 | °C | |
| Front Temperature | 199 - 227 | °C | |
| Nozzle Temperature | 204 - 216 | °C | |
| Mold Temperature | 26.7 - 48.9 | °C | |
| Injection Pressure | 2.76 - 10.3 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Holding Pressure | 2.07 - 8.27 | MPa | |
| Back Pressure | 0.00 - 0.345 | MPa |
| Injection instructions |
|---|
| Injection Speed: Slow to ModerateScrew RPM: 50, recovery 3 seconds before mold opensCycle Time: Variable - Wall thickness dependent |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUPREME Specialty PS SP201 4551 | Supreme Petrochem Ltd. | PS (GPPS) | SUPREME Specialty PS |
| X-Pro PP 2315 | CTC Plastics, LLC | PP Copolymer | X-Pro |
| NILAMID® B3 D | Nilit Plastics | Nylon 6 | NILAMID® |
| NEOPLAST 180 M/E | Zylog Plastalloys | TPE | NEOPLAST |
| Hylon® N1213L | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
