Order Products : sales@su-jiao.com
Safron® C722-07NA
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Safripol (PTY) LTD |
| Trademark: | Safron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vnGE3o_Safron-C722-07NA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Safron® C722-07NA Polypropylene Resin is a nucleated impact copolymer with high impact strength, good flow and a narrow molecular mass distribution used for general purpose complex injection moulding applications where toughness is required. The narrow MWD leads to a high dimensional stability in complicated articles. Safron® C722-07NA Polypropylene Resin contains an antistatic additive. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.5 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 26.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 8.0 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1250 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| 0°C, injection molding | 5.5 | kJ/m² | ISO 179/1eA |
| 23°C, injection molding | 11 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1 | |||
| 0.45 MPa, not annealed | 72.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 52.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature 2 | 66.0 | °C | ISO 306/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 | °C | |
| Middle Temperature | 220 - 240 | °C | |
| Front Temperature | 240 - 260 | °C | |
| Nozzle Temperature | 260 | °C |
| Injection instructions |
|---|
| Zone 4 Temperature: 260 to 270°C |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AEI SX-0620:CM601 | AEI Compounds Limited | XLPE | AEI |
| Kepamid® 2300MRH | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
| KetaSpire® KT-820SFP | Solvay Specialty Polymers | PEEK | KetaSpire® |
| PERLER® N09X4000B10 | A.D. Compound S.p.A. | PP Copolymer | PERLER® |
| Starex TX-0550 | LOTTE ADVANCED MATERIALS CO., LTD. | MABS | Starex |
