Order Products : sales@su-jiao.com
Hyrene® PS-HI 16/2
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | Entec Polymers |
| Trademark: | Hyrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vl1Sw3_HyrenePSHI162.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLYSTYRENE, HIGH IMPACT, HIGH FLOW FDA 21 CFR 177.1640 Compliant |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 16 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C, Injection Molded) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C, Injection Molded) | 65 | % | ASTM D638 |
| Flexural Modulus (23°C, Injection Molded) | 2350 | MPa | ASTM D790 |
| Flexural Strength (23°C, Injection Molded) | 40.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 94.0 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | 速率 A (50°C/h), 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SEN-320M75 | SHIN-A T&C | Epoxy | SHIN-A |
| ICORENE® 6005 | ICO Polymers EMEA, A Division of A. Schulman | LLDPE | ICORENE® |
| Mablex 451 | Ravago Group | PC+ABS | Mablex |
| OP - PPO PPOX-10GF | Oxford Polymers | PPE+PS | OP - PPO |
| Osterlene® LD-13.5-918 | Osterman & Company | LDPE | Osterlene® |
