Order Products : sales@su-jiao.com
COSMOTHENE® F410-7
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | TPC, The Polyolefin Company (Singapore) Pte Ltd |
| Trademark: | COSMOTHENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | viZOmY_COSMOTHENE-F410-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
COSMOTHENE F410-7 has excellent transparency, good stiffness and processibility. BHT is not used and it is formulated with medium level of slip and antiblocking agent. Transparent thin gauge bag, shopping bag, zipper bag and many others general purpose bag. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.923 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 5.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 13.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 550 | % | ASTM D638 |
| Apparent Bending Modulus | 240 | MPa | ASTM D747 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 111 | °C | Internal method |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (30.0 µm) | 120 | ASTM D2457 | |
| Haze (30.0 µm) | 4.0 | % | ASTM D1003 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Blocking (30.0 µm) | 30.0 | g/100 cm² | ASTM D3354 |
| Slip (30.0 µm) | 0.140 | Tan θ | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 130 | °C | |
| Cylinder Zone 2 Temp. | 145 | °C | |
| Cylinder Zone 3 Temp. | 155 | °C | |
| Melt Temperature | 160 | °C | |
| Die Temperature | 160 | °C |
| Extrusion instructions |
|---|
| Extruder: 50 mm diameter; L/D: 26; C.R: 3.4H Temperature: 160°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1099 X 115081 C | RTP Company | PBT | RTP |
| Silamid® EFXSV10 | Roonamid a.s. | Nylon 6 | Silamid® |
| Aplax P2413GN | Ginar Technology Co., LTD. | PP, Unspecified | Aplax |
| CERTENE™ PHF-8 | Muehlstein | PP Homopolymer | CERTENE™ |
| DECAL® 666/8 | Synres-Almoco BV | Phenolic | DECAL® |
