Order Products : sales@su-jiao.com

THERMOLAST® M TM3RST (Series: MC/RS)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® M
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vggnkg_THERMOLAST-M-TM3RST-Series-MC-RS-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The MC/RS Series is your material solution for applications requiring basic medical approvals such as ISO 10993-5. The series is characterized by excellent resealing properties. The compounds are produced exclusively by a special medical unit and available in translucent colors.

Typical applications

Closures

Infusion stoppers

Membranes

Material advantages

Adhesion to PP

DMF listed

Excellent compression set

For injection molding and extrusion

Free of animal basedingredients

KRAIBURG TPE Medical service package (description below)

Outstanding resealing properties

Sterilizable (autoclave 134°C, gammaradiation 2x35 kGy, EtO)

Tested according to ISO 10993-5

General Information
Features	Autoclave Sterilizable Ethylene Oxide Sterilizable Good Adhesion No Animal Derived Components Radiation Sterilizable
Uses	Closures Medical/Healthcare Applications Membranes
Agency Ratings	DMF 25603 ISO 10993 Part 5
Appearance	Translucent
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.890	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	33		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	7.50	MPa	ISO 37
Tensile Elongation ²(Break)	800	%	ISO 37
Tear Strength ³	12	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	9.0	%
70°C, 24 hr	20	%
100°C, 24 hr	30	%

Extrusion	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Cylinder Zone 1 Temp.	160	°C
Cylinder Zone 2 Temp.	180	°C
Cylinder Zone 3 Temp.	200	°C
Die Temperature	200 to 230	°C

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
RapidVac™ VA-285	Innovative Polymers, Inc.	TSU	RapidVac™
SLOVALEN® PH 76 FRD 3	Plastcom	PP, Unspecified	SLOVALEN®
Hanwha Total PP GB52	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, High Crystal	Hanwha Total PP
Hostacom X M3 T16	LyondellBasell Industries	PP Copolymer	Hostacom
Sylvin 7833-75C Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin